HMWSSB Manager Syllabus 2022 TSPSC Civil Mechanical Engineering Exam Pattern

TSPSC HMWSSB Manager Exam Syllabus 2022 Download PDF: Telangana Public Service Commission has released HMWSSB Manager Syllabus for the Civil Engineering, Mechanical Engineering & other engineering disciplines. Candidates can download the HYDERABAD METROPOLITAN WATER SUPPLY AND SEWERAGE BOARD ENGINEERING SERVICE Exam Syllabus from the article given below. Find out the detailed information regarding the TSPSC Manager Syllabus, Exam pattern, Selection Process etc for advertisement no 3/2022.

TSPSC HMWSSB Water Board Manager (Engineering) Exam Date 2022 Download Hall Ticket Here.

TSPSC Manager Syllabus 2022 Download PDF HMWSSB Engineering Exam Pattern

Authority Telangana State Public Service Commission (TSPSC)
Vacancy Name Manager
Syllabus Format PDF
Selection Process Written Exam, Interview
Last Date to Apply 30-04-20
Official Site

Download TSPSC Group 4 Hall ticket 2022.

TSPSC Manager Selection Process

Telangana PSC will recruit the Manager posts based on the following steps –

  1. Objective Type Test (Written / Online Exam)
  2. Interview (Personality Assessment Test).

Written Exam will be of OMR Based. Multiple Choice Question will be asked. Moreover, the exam may also be conducted in the form of objective type test.

TSPSC Manager Exam Centers

Written Test will be conducted in the following centers of the Telangana State –

  • HYDERABAD (including HMDA Jurisdiction)

Detailed Exam Center address will be mentioned in the candidate’s hall ticket.

HMWSSB Manager (Engineering) Exam Pattern 2022

SubjectsTotal Question DurationMarks
Paper-I: General Studies and General Abilities150 150 Min 150
Paper-II: Civil Engineering (Degree Level) OR Mechanical Engineering (Degree Level) OR Electrical Engineering (Degree Level) OR Electronics & Communication Engineering (Degree Level) OR Computer Science & Information Technology (Degree Level)150 150 Min 300
Total Marks500

Recommended Book For Exam-

1.Reasoning for Exam

2. General Studies for Exam

Language of the Question Paper of TSPSC Manager Posts

  • General Studies and General Abilities (Paper 1) will be of Bilingual type that is the in English and Telugu.
  • Paper 2 will be asked in English Language only.


1.  Current affairs – Regional, National and International.

2.  International Relations and Events.

3.  General Science; India’s Achievements in Science and Technology.

4.  Environmental    issues;    Disaster    Management-    Prevention    and    Mitigation Strategies.

5.  Economic and Social Development of India and Telangana.

6.  Physical, Social and Economic Geography of India.

7.  Physical, Social and Economic Geography and Demography of Telangana.

8.  Socio-economic,  Political  and  Cultural  History  of  Modern  India  with  special emphasis on Indian National Movement.

9.  Socio-economic,   Political   and   Cultural   History   of   Telangana   with   special emphasis on Telangana Statehood Movement and formation of Telangana state.

10. Indian Constitution; Indian Political System; Governance and Public Policy.

11.Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and inclusive policies.

12.Society, Culture, Heritage, Arts and Literature of Telangana. 13.Policies of Telangana State.

14.Logical Reasoning; Analytical Ability and Data Interpretation. 15.Basic English. (10th  class Standard)

TSPSC HMWSSB Manager Paper 2 Syllabus (DEGREE LEVEL)

Find the Subject wise (Engineering Discipline) wise Syllabus of the Manager Recruitment Written Exam to be conducted by TSPSC. The syllabus has been obtained from the official website. We have given here download link of the Telangana Public Service Commission Manager Recruitment Written Exam Syllabus & Exam Pattern.


1.   Building Materials and Construction:

Bricks–  Types  of  Bricks,  Indian  standard  classification,  properties;  Stones  –  Types  of stones,   classification,   properties,   dressing   and   polishing   of   stones;   Methods   of Quarrying;   Cement   –   Different   grades   and   types   of   cement,   properties   and   IS specifications; Aggregates – coarse and fine aggregate, properties and IS specifications; Cement  Mortar  –  Proportions  of  cement  mortar  for  various  applications;  Concrete  – Constituents  of  Concrete,    Different  grades  of  Concrete,  mix  proportioning  using  IS Code, Properties of fresh and hardened Concrete; Admixtures – Types of Admixtures

2.   Strength of Materials and Theory of Structures:

Strength  of  Materials:  Simple  stresses  and  strains,  elastic  constants  and  relationship between  them;  Compound  bars;  Temperature  stresses;  Shear  forces  and  bending moment diagrams for beams; Principal stresses and Mohr’s circle of  stress, Theory of bending  and  bending  stresses  ;  Shear  stress  distribution;  Theory  of  torsion;  Springs; Deflections  of  beams;  Thin  and  thick  cylinders;;  Analysis  of  trusses,  Betti-Maxwell theorem; Shear centre and unsymmetrical bending.

Theory of  Structures:  Direct  and  bending  stresses;  Columns and  struts;  Strain  energy method;  Moving  loads  and influence lines;  Arches and suspension bridges;  Static and kinematic  indeterminacy;  Moment  distribution,  Slope  deflection,  and  Kani’s  methods applied to continuous beams and portal frames; Column analogy and matrix methods of analysis.

3.    RCC and Steel Structures:

Concrete  Structures:  Materials,  permissible  stresses  and  IS  Specifications;  Working stress  methods;  Limit  State  Method  –  Stress  Blocks  parameters,  design  of  Beams, Slabs, Columns and Footing; Design for Shear and Torsion; Design of Retaining Walls, Water tanks, and T-Beam Slab bridges; Yield line theory.

Steel  Structures:  Properties  of  steel  sections,  permissible  stresses,  IS  Specifications; Riveted and welded joints and connections; Design of simple and compound Beams and Columns,  Column bases,  Roof trusses, Plate and Gantry Girders; Plate Girder Lattice Girder Railway bridges, and Bearings. Plastic analysis.

Pre-Stressed Concrete:  Basic concepts, material for pre-stressing, losses in Pre-stress, classification of pre-stressing system; Analysis of PSC Sections.

4.   Fluid Mechanics and Hydraulics:

Fluid   Properties;   Measurement   of   Pressure   –   Manometers;   Fluid   Kinematics   – Classification of Fluids, Stream function and Velocity potential, significance and use of Flownets,    Fluid  dynamics  –    Continuity  equation,  Bernoulli’s  equations  and  Impulse momentum  equation;  Laminar  and  Turbulent  flow  through  pipes  –  significance  of

Reynolds number, Hagen – Poiseuille’s equation, Darcy – Weisbach equation, Friction factor,  Water  hammer  phenomenon;  Compressible  flow  –  Bernoulli’s  equation  for Isothermal and Adiabatic conditions, Mach Number, Mach cone, stagnation properties; Steady  uniform  flow  through  open  channels;  Gradually  varied  flows  –  significance  of Froude number, classification and computation of Flow profiles, Hydraulic jump, Surges; Boundary  layer  –  Laminar  and  Turbulent  Boundary  layer,  Boundary  layer  thickness, rough  and  smooth  Boundaries,  Boundary  layer  separation;  Dimensional  analysis  and similarity  laws;  Hydraulic  Turbines  –  classification,  Velocity  triangles,  principles  and design of reaction and impulse turbines; Centrifugal pumps – specific speed, work done and efficiency, characteristic curves.

5.   Hydrology and Water Resources Engineering:

Hydrological cycle; Rainfall – types and measurement, network design; Infiltration – Ф- index; Runoff – process, factors and determination of runoff, dependable yield; Floods – flood  hydrograph,  computation  of  flood  peak  using  rational  formula,  unit  hydrograph method  and  Gumbel’s  extreme  value  methods;  Groundwater  –  types  of  aquifer  and properties,  Darcy’s  law,  specific  yield,  steady  radial  flow  to  wells  in  confined  and unconfined  aquifers;  Irrigation  –  types  and  advantages,  soil  water  plant  relationship, consumptive  use,  duty, delta, base period,  crops  and their  water  requirements;  Single and multipurpose projects; Dams – classification, forces and design of Gravity dam and Earth dam; Spillways – types, energy dissipation, stilling basin, Appurtenances; Canals – alignment,  Kennedy’s  and  Lacey’s  theories,  lining  of  Canals;  Weirs  –  components, design  of  vertical  drop  and  sloping  glacis  weir;  Seepage  forces  –  Bligh’s  Theory, Khosla’s  theory;  Canal  falls  –  types  and  design  principles;  Cross  drainage  works  – classification  and  design  principles  of  aqueducts;  Hydropower  –  classification  and principle components of Hydroelectric power plants.

6.   Environmental Engineering:

Water  supply  –  objectives,  rate  of  demand,  population  forecasts;  Analysis  of  water  – classification, design of coagulation, sedimentation, filtration, disinfection and softening processes; Methods of layout of distribution pipes – Hardy cross method; Waste water engineering  –  systems  of  sewerage,  hydraulic  formulae  and  design  of  sewers,  BOD, COD,  self  purification  of  natural  streams,  methods  of  sewage  disposal;  Treatment  of sewage  –  principles  and  design  of  grit  chamber,  sedimentation  tanks,  trickling  filters, activated sludge process, sludge digestion tanks, septic tanks; Municipal solid waste – characteristics,  collection  and  transportation  of  solid  wastes;  Air  Pollution  –  types  and sources  of  pollutants,  air  quality  standards;  Noise  pollution  – Impacts  and  permissible limits, measurement and control of noise pollution.

7.   Transportation Engineering:

Highway Classification as per IRC; Highway alignment; Engineering Surveys; Geometric Design;  Cross  sectional  elements  of  road;  Gradient;  Grade  compensation;  Traffic Surveys – speed, Volumes, origin and destination; Highway capacity and level of service as per HCM 2000; Intersection – at grade and grade separated; Channelization; Rotary intersection; signal design – webstar method, traffic signs, pavement marking; Parking studies,  accidental  studies,  pavement  types,  Factors  considered  for  pavement  design, flexible and rigid pavements design concepts.

Railway Engineering:  Permanent  way,  rails,  sleepers,  ballast;  Creep,  coning  of  wheel, rail fixtures and fastenings, super elevation, cant deficiency, curves, turnout; Points and crossings.

Airport Engineering: Selection of site of Airport, runway orientation and design, wind rose diagram, basic run way length, correction to basic runway length.

8.   Soil Mechanics and Foundation Engineering:

Soil    Mechanics:    Physical    properties    of    soils,    Classification    and    identification, Permeability,  Capillarity,  Seepage,  Compaction,  Consolidation,  Shear  Strength,  Earth pressure, Slope stability;

Foundation Engineering: Site investigations, stress distribution in soils, Bearing capacity, Settlement analysis, Types of Foundation, Pile foundations, Foundations on expansive soils;  swelling  and  its  preventions;  Coffer  dams,  Caissons,  Dewatering,  Bracing  for excavations, Newmark charts, machine foundations.

Engineering   Geology:   Mineralogy,   Structural   Geology,   Groundwater   Exploration methods;   Engineering   Geology   applications   for   Tunnels,   Dams   and   Reservoirs; Geological hazards and preventive measures.

9.   Estimation, Costing and Construction Management:

Abstract  estimate:  Detailed  estimate  –  centerline,  long  &  short  wall  method,  various items of Civil Engineering works as per Indian Standard, General Specifications  – Earth Work, Brick / Stone Masonry in Cement Mortar, RCC, Plastering in Cement Mortar, Floor finishes, white wash, colour wash; Standard schedule of rates, lead and lift, preparation of  lead  statement;  Computation  of  earth  work  –  Mid-ordinate,  Mean  Sectional  area, Trepezoidal method, Prismoidal Rule; Approximate estimate – Plinth area and cubic rate estimate.

10. Surveying:

Principle and classification of surveying, chain surveying; Compass surveying; Levelling and contouring; Theodolite surveying; curves; Introduction and Fundamental concepts of electronic measuring instruments – EDM, Total station, GIS & GPS.

For Mechanical Engineering, Electrical Engineering, Electronics & Communication Engineering, Computer Science & Information Technology Syllabus for Manager posts in TSPSC (HMWSSB), Download the PDF file.

TSPSC HMWSSB Manager Syllabus 2022 (In Detail Telugu / English Language) Download PDF – Click Here.

Other Important Links:

  • TSPSC Manager Hall Ticket 2022 – Click Here.
  • HMWSSB Manager Application Form – Click Here.

All the Best for Exam!

Leave a Comment